Version 1.2-7 (Released 11·16·2005)
CHANGES for 1.2-7
===================================================
- WiFiDog bugfix
NOTES for 1.2-7
===================================================
The updates contained on this release only
effect premium services.
Version 1.2-5 (Released 9 ·08·2005)
CHANGES for 1.2-5
===================================================
- Block access to port 8080 and 3128 while using WiFiDog with filtering
- WiFiDog bugfix - remove token for denied clients
- Remote proxy bug fix
NOTES for 1.2-5
===================================================
Bug fix release! The updates contained on this release only effect premium services. Update zone control to version 1.2-5 or your cd will not boot correctly
Version 1.2-3 (Released 8 ·24·2005)
CHANGES for 1.2-3
===================================================
- Added DHCPd configuration
- Fixed Round Robin configuration download
NOTES for 1.2-3
===================================================
The updates contained on this release only effect premium services
Version 1.2-1 (Released 8 ·12·2005)
CHANGES for 1.2-1
===================================================
- Fixed GUI Bug
- Added IPP2P
NOTES for 1.2-1
===================================================
This is a bugfix release for GUI users.
Version 1.1-4 (Released 8 ·08·2005)
CHANGES for 1.1-4
===================================================
- Fixed WiFiDog Walled Garden
- Corrected Configuration queue cron
NOTES for 1.1-4
===================================================
This is a bugfix release. Only premium service subscribers will benefit from an upgrade to this version.
Version 1.1-0 (Released 7 ·23·2005)
CHANGES for 1.1-0
===================================================
- Added Dialog for premium service
- Security Fix
NOTES for 1.1-0
===================================================
*THIS IS A SECURITY FIX RELEASE* All existing users that use SSH
should upgrade to this version immediately. A vulnerability found can
allow an attacker to gain root privileges.
Version 0.6-0 (Released 03 ·05·2005)
CHANGES for 0.6-0
===================================================
- Added usb as configuration medium option
- Added auto-configuration
for Prism II/2 pci and pcmcia cards
- Added firmware and hostap
utility for cards with SSF
- Added auto-reboot dialog configuration
- Added samba 3.0.10-1
- Added xdm 4.3.0
- Added rxvt
- Added poptop(pptpd) (w/radiusclient)
- Added ppp
- Added asterisk
- Added zaptel 1.0.2-2
- Added PPTP passthru to open mode
- Added cron to [re]start nocat
if it crashes
- Updated dansguardian to 2.8.0
- Moved all dg conf files to zonecd
config
- Modified /usr/local/nocat/lib/NoCat/Remote/Control.pm
(catch SOAP faults)
- Modified /usr/local/nocat/lib/NoCat/Accounting/XML.pm
(deny empty responses)
- Modified /usr/local/nocat/lib/NoCat.pm (more verbose
logging)
- New ssh key pairs generated at boot and saved to config
medium
- Removed excess baggage (cleaned apt-get and removed manpages
[-120MB])
- Changed LessX client to
rxvt
- Patched and recompiled kernel(pptp & mppe)
- Modified ntpdate
to remove syslogging, and to step time, not slew
- Updated hwdata
(support more devices for autoconfig)
- Changed screen resolution
to 800x600
- Removed fruity boot colors (sorry Klaus, i just can't
take it any more)
- Fixed open mode access to port 443
with content filter enabled (wrong
initialize.fw used)
Version 0.5-2 (Released 11·03·2004)
CHANGES for 0.5-2
===================================================
- Upgraded XFCE4 to 4.0.5;
- Fixed "Stuck in Open Mode" bug;
- Fixed
Integer(Long) username bug;
NOTES for 0.5-2
===================================================
*THIS IS A BUGFIX RELEASE* All existing users that do not require
an email address as a username for their login validation should
update to this release. If a user registers a username with a long
integer accounting fails because SOAP::Lite typecast to an int, when
the webservice is expecting a long. All GUI users should upgrade
to this version. XFCE4 was upgraded to 4.0.5 to fix a memory leak
found in all XFCE4 versions < 4.0.3.
Version 0.5-1 (Released 10 ·25·2004)
CHANGES for 0.5-1
===================================================
- Added QOS
- Added IMQ
- Added Hostap
- Added IPSEC support
- Added PPTP support
- Installed Shorewall
- Installed Wondershaper
- Installed FreeS/Wan
- Installed OLSR
- Installed Motion
- Installed ntpdate
- Installed DDclient - dyndns.org
- Upgraded Squid
- Modified Iptables (re-compiled)
- Fixed pre.sh exec
- Fixed DHCP eth1 failures
- Fixed Bad d/l key error check
- Fixed Internet
connection error
NOTES for 0.5-1
===================================================
Recompiled the kernel (2.4.21) to support bandwidth shaping, pptp,
and ipsec; A new section for bandwidth management in Zone control
that will be visible when you select ZoneCD version 0.5-1; Pump is
no longer used to get an ip for eth0. dhclient is now used to obtain
an IP for eth0; replaced rdate with ntpdate. added better validation/errors
to boot dialog.
Version 0.4-2 (Released 09·18·2004)
CHANGES for 0.4-2
===================================================
- Modified dansguardian.conf
- Modified boot configure scripts
NOTES for 0.4-2
===================================================
Bug-fix release to fix Open mode content filter.
Version 0.4-1 (Released 09·07·2004)
CHANGES for 0.4-1
===================================================
- New Control Server;
- Fixed Eth0/Eth1 Bug (i mean it this
time);
- Fixed LogMailer rollover;
- Fixed NoX Shell(no job control);
- Added dansguardian.conf
to floppy config;
- Added filter on/off dialog for Open mode;
- Installed iptraf;
- Updated GUI Desktop Controls;
- Modified nocat/bin/access.fw;
- Modified nocat/bin/initialize.fw;
- Modified nocat/lib/NoCat/Gateway/Captive.pm;
- Modified
/etc/hosts;
- Removed Gimp and a few other "useless" programs;
NOTES for 0.4-1
===================================================
The new server has many changes
not shown here; NIC bug was caused by pump running in the background during
network configuration. Some users that experienced problems with
previous versions may need to switch cables for Eth0 and
Eth1; The NoX fix was to not use NoX. The X server is
started and runs a single instance of xterm. No windows
manger; dansguardian.conf is copied to and from the floppy
to allow some tweaking of filter rules;
Version 0.3-1 (Released 07·19·2004)
CHANGES for 0.3-1
===================================================
- Fixed static IP config bug;
- Added dialog for Open mode homepage redirect;
- Added NoCat::Remote::Control;
- Added tcpdump;
- Added linuxwias;
- Added rdate;
- Modified nocat/bin/gateway;
- Modified nocat/lib/NoCat/Accounting/XML.pm;
- Modified nocat/lib/NoCat/Gateway.pm;
- Modified nocat/lib/NoCat/Gateway/Open.pm;
- Modified nocat/lib/NoCat/Gateway/Captive.pm;
- Modified nocat/lib/NoCat/Gateway/Passive.pm;
NOTES for 0.3-1
===================================================
I did find a logical error that caused the static IP configuration
problem. I also slowed down the CD init script a little during the
network configuration; If you use Open mode, you will now be promted
to provide a url for the homepage redirect. You can also selectto
disable this feature; The ZoneCD will run rdate during boot, and
once a day to keep the time syncronized. The time on the ZoneCD is
UTC. This is important for the Control Service to function properly;
The Control Service is now available. The service is not 100% complete,
but the client side(ZoneCD) is stable. Work still needs to be finished
on the server side on the interfaces, and time zone management. Please
begin using XML Accounting(configured
Version 0.3-0(Duality) (Released 07·01·2004)
- Added Boot configuration/save script
- Added a new user class(Liberated)
- Redefined user classes(Public=Protected|Liberated)
- Added End-user accounting
- Added firewall open port configuration
- Added PHP
- Added SOAP::Lite and required libs
- Added openssl from source
- Secured communication between ZoneCD and Authserver
- Added 'reload' switch to nocat init script
- Depreciating ZoneID(login required for 'Closed' mode)
- Drop all connections to wired LAN network(optional)
- Cleaned up Logmailer log rollover
Version 0.2-6 (Released 06·11·2004)
- Added ability to assign eth0 a static IP address
- Added sg3-utils package
- Added ability to email boot log after system boots
- Added a melody after sysmtem comlpetes boot process
- Combined "no x" and "gui" into one distro.
Version 0.2-4 (Released 03·22·2004)
- Created a no-X version and GUI version
- Added ability to use your own Acceptable Use Document
- Added Remote Registration functionality (php api)
- Relaxed content filter rules for Chat(PIC)
- Added log mailer program (cron)
- Added ability to run commands from floppy script named init.sh
- Fixed dnsmasq bug (resolv.conf re-write fix)
Version 0.2-3 (Released 03·16·2004)
- Fixed open mode bug (FindBin)
- Fixed open mode content filter on/off
- Added .ogm and .mkv to the blocked extension list
Version 0.2-2 (Released 03·13·2004)
- Fixed Eth1/DHCP Bug Again
- Added Floppy Disk option for NoCat configuration
- Removed Webmin from startup
Version 0.1-6 (Released 03·02·2004)
- Fixed Eth1 Up Bug
- Explicitly start DHCP Server on Eth1
- Added/Updated .zip, .tar, .gz, .sea, .sit, .sh, & .rm to
blocked file extension list
Version 0.1-4 (Released 02·26·2004)
- Closed port 22 for Public class
- Updated nocat.conf LogoutURL directive
- Updated dansguardian.conf accessdeniedaddress directive
- Apache not started during boot (no longer needed)
Version 0.1-3 Beta (Released 02·17·2004)
- Fixes for user tracking module
- Support for user classes. Only Public class is subject to content
filter and port restrictions.
- Fixed Gnupg again.
Version 0.1-2 Beta (Released 02·04·2004)
- Corrected first run gateway failure (GnuPG)
- Changed Authserver address to ssl.publicip.net (trusted root
certificate)
- Dansguardian block page changed to remote server (ssl.publicip.net)
to enable customization.
- Eliminated a couple annoying boot bugs
- Homepage redirect will only occur once an hour (without login
agent[pop-up])
- Opened port 110 for pop3 to allow users to check email.
|